Gecko [ thecigaretteboxes.com ]

Name	Size	Permission
test_access.aug	3.44 KB	-rw-r--r--
test_activemq_conf.aug	758 B	-rw-r--r--
test_activemq_xml.aug	1.63 KB	-rw-r--r--
test_afs_cellalias.aug	1.31 KB	-rw-r--r--
test_aliases.aug	2.99 KB	-rw-r--r--
test_anaconda.aug	2.07 KB	-rw-r--r--
test_anacron.aug	1.21 KB	-rw-r--r--
test_approx.aug	1.44 KB	-rw-r--r--
test_apt_update_manager.aug	1.12 KB	-rw-r--r--
test_aptcacherngsecurity.aug	1.17 KB	-rw-r--r--
test_aptconf.aug	5.26 KB	-rw-r--r--
test_aptpreferences.aug	1.86 KB	-rw-r--r--
test_aptsources.aug	3.42 KB	-rw-r--r--
test_authorized_keys.aug	4.47 KB	-rw-r--r--
test_automaster.aug	1.53 KB	-rw-r--r--
test_automounter.aug	5.2 KB	-rw-r--r--
test_avahi.aug	545 B	-rw-r--r--
test_backuppchosts.aug	623 B	-rw-r--r--
test_bbhosts.aug	3.68 KB	-rw-r--r--
test_bootconf.aug	980 B	-rw-r--r--
test_build.aug	8.12 KB	-rw-r--r--
test_cachefilesd.aug	579 B	-rw-r--r--
test_carbon.aug	2.54 KB	-rw-r--r--
test_ceph.aug	4.86 KB	-rw-r--r--
test_cgconfig.aug	5.93 KB	-rw-r--r--
test_cgrules.aug	903 B	-rw-r--r--
test_channels.aug	4.72 KB	-rw-r--r--
test_chrony.aug	5.92 KB	-rw-r--r--
test_clamav.aug	8.48 KB	-rw-r--r--
test_cobblermodules.aug	620 B	-rw-r--r--
test_cobblersettings.aug	1.34 KB	-rw-r--r--
test_collectd.aug	1.3 KB	-rw-r--r--
test_cpanel.aug	1.62 KB	-rw-r--r--
test_cron.aug	1.96 KB	-rw-r--r--
test_cron_user.aug	779 B	-rw-r--r--
test_crypttab.aug	1.28 KB	-rw-r--r--
test_csv.aug	1.56 KB	-rw-r--r--
test_cups.aug	13.93 KB	-rw-r--r--
test_cyrus_imapd.aug	1.33 KB	-rw-r--r--
test_darkice.aug	575 B	-rw-r--r--
test_debctrl.aug	13.94 KB	-rw-r--r--
test_desktop.aug	1.23 KB	-rw-r--r--
test_devfsrules.aug	2.17 KB	-rw-r--r--
test_device_map.aug	797 B	-rw-r--r--
test_dhclient.aug	4.69 KB	-rw-r--r--
test_dhcpd.aug	15.07 KB	-rw-r--r--
test_dns_zone.aug	10.33 KB	-rw-r--r--
test_dnsmasq.aug	1.19 KB	-rw-r--r--
test_dovecot.aug	22.3 KB	-rw-r--r--
test_dpkg.aug	322 B	-rw-r--r--
test_dput.aug	3.37 KB	-rw-r--r--
test_erlang.aug	2.58 KB	-rw-r--r--
test_ethers.aug	1.4 KB	-rw-r--r--
test_exports.aug	1.69 KB	-rw-r--r--
test_fai_diskconfig.aug	15.04 KB	-rw-r--r--
test_fonts.aug	19.45 KB	-rw-r--r--
test_fstab.aug	4.45 KB	-rw-r--r--
test_fuse.aug	590 B	-rw-r--r--
test_gdm.aug	620 B	-rw-r--r--
test_getcap.aug	3.77 KB	-rw-r--r--
test_group.aug	1.09 KB	-rw-r--r--
test_grub.aug	10.04 KB	-rw-r--r--
test_grubenv.aug	2.44 KB	-rw-r--r--
test_gshadow.aug	359 B	-rw-r--r--
test_gtkbookmarks.aug	820 B	-rw-r--r--
test_host_conf.aug	834 B	-rw-r--r--
test_hostname.aug	103 B	-rw-r--r--
test_hosts.aug	1.78 KB	-rw-r--r--
test_hosts_access.aug	6.12 KB	-rw-r--r--
test_htpasswd.aug	468 B	-rw-r--r--
test_httpd.aug	16.32 KB	-rw-r--r--
test_inetd.aug	4.51 KB	-rw-r--r--
test_inifile.aug	11.64 KB	-rw-r--r--
test_inittab.aug	1.82 KB	-rw-r--r--
test_inputrc.aug	5.13 KB	-rw-r--r--
test_interfaces.aug	3.65 KB	-rw-r--r--
test_iproute2.aug	945 B	-rw-r--r--
test_iptables.aug	7.39 KB	-rw-r--r--
test_iscsid.aug	2.45 KB	-rw-r--r--
test_jaas.aug	5.35 KB	-rw-r--r--
test_jettyrealm.aug	982 B	-rw-r--r--
test_jmxaccess.aug	637 B	-rw-r--r--
test_jmxpassword.aug	653 B	-rw-r--r--
test_json.aug	17.26 KB	-rw-r--r--
test_kdump.aug	2.84 KB	-rw-r--r--
test_keepalived.aug	14.33 KB	-rw-r--r--
test_known_hosts.aug	1.79 KB	-rw-r--r--
test_koji.aug	1.65 KB	-rw-r--r--
test_krb5.aug	28.56 KB	-rw-r--r--
test_ldap.aug	398 B	-rw-r--r--
test_ldif.aug	3.88 KB	-rw-r--r--
test_ldso.aug	486 B	-rw-r--r--
test_lightdm.aug	3.98 KB	-rw-r--r--
test_limits.aug	924 B	-rw-r--r--
test_login_defs.aug	528 B	-rw-r--r--
test_logrotate.aug	7.95 KB	-rw-r--r--
test_logwatch.aug	322 B	-rw-r--r--
test_lokkit.aug	2.1 KB	-rw-r--r--
test_lvm.aug	4.56 KB	-rw-r--r--
test_mailscanner.aug	32.15 KB	-rw-r--r--
test_mailscanner_rules.aug	2.6 KB	-rw-r--r--
test_masterpasswd.aug	3.21 KB	-rw-r--r--
test_mcollective.aug	1.2 KB	-rw-r--r--
test_mdadm_conf.aug	2.52 KB	-rw-r--r--
test_memcached.aug	1.15 KB	-rw-r--r--
test_mke2fs.aug	2.13 KB	-rw-r--r--
test_modprobe.aug	4.07 KB	-rw-r--r--
test_modules.aug	229 B	-rw-r--r--
test_modules_conf.aug	3.23 KB	-rw-r--r--
test_mongodbserver.aug	775 B	-rw-r--r--
test_monit.aug	1.03 KB	-rw-r--r--
test_multipath.aug	6.5 KB	-rw-r--r--
test_mysql.aug	8.75 KB	-rw-r--r--
test_nagioscfg.aug	2.95 KB	-rw-r--r--
test_nagiosobjects.aug	1.69 KB	-rw-r--r--
test_netmasks.aug	640 B	-rw-r--r--
test_networkmanager.aug	1.27 KB	-rw-r--r--
test_networks.aug	1.16 KB	-rw-r--r--
test_nginx.aug	7.64 KB	-rw-r--r--
test_nrpe.aug	2.13 KB	-rw-r--r--
test_nslcd.aug	12.84 KB	-rw-r--r--
test_nsswitch.aug	1.54 KB	-rw-r--r--
test_ntp.aug	5.09 KB	-rw-r--r--
test_ntpd.aug	1.87 KB	-rw-r--r--
test_odbc.aug	1.62 KB	-rw-r--r--
test_opendkim.aug	5.66 KB	-rw-r--r--
test_openshift_config.aug	3.64 KB	-rw-r--r--
test_openshift_http.aug	2.16 KB	-rw-r--r--
test_openshift_quickstarts.aug	12.42 KB	-rw-r--r--
test_openvpn.aug	28.09 KB	-rw-r--r--
test_oz.aug	611 B	-rw-r--r--
test_pagekite.aug	2.75 KB	-rw-r--r--
test_pam.aug	2.13 KB	-rw-r--r--
test_pamconf.aug	1010 B	-rw-r--r--
test_passwd.aug	2.44 KB	-rw-r--r--
test_pbuilder.aug	531 B	-rw-r--r--
test_pg_hba.aug	6.1 KB	-rw-r--r--
test_pgbouncer.aug	1.97 KB	-rw-r--r--
test_php.aug	1.4 KB	-rw-r--r--
test_phpvars.aug	1.63 KB	-rw-r--r--
test_postfix_access.aug	1.52 KB	-rw-r--r--
test_postfix_main.aug	1.03 KB	-rw-r--r--
test_postfix_master.aug	3.77 KB	-rw-r--r--
test_postfix_passwordmap.aug	1.31 KB	-rw-r--r--
test_postfix_sasl_smtpd.aug	530 B	-rw-r--r--
test_postfix_transport.aug	1.58 KB	-rw-r--r--
test_postfix_virtual.aug	1.23 KB	-rw-r--r--
test_postgresql.aug	8.07 KB	-rw-r--r--
test_properties.aug	3.51 KB	-rw-r--r--
test_protocols.aug	1.3 KB	-rw-r--r--
test_puppet.aug	547 B	-rw-r--r--
test_puppet_auth.aug	1.1 KB	-rw-r--r--
test_puppetfile.aug	4.45 KB	-rw-r--r--
test_puppetfileserver.aug	949 B	-rw-r--r--
test_pylonspaste.aug	1.73 KB	-rw-r--r--
test_pythonpaste.aug	1.23 KB	-rw-r--r--
test_qpid.aug	1.3 KB	-rw-r--r--
test_quote.aug	8.66 KB	-rw-r--r--
test_rabbitmq.aug	3.66 KB	-rw-r--r--
test_radicale.aug	1.04 KB	-rw-r--r--
test_rancid.aug	706 B	-rw-r--r--
test_redis.aug	6.17 KB	-rw-r--r--
test_reprepro_uploaders.aug	4.68 KB	-rw-r--r--
test_resolv.aug	1.46 KB	-rw-r--r--
test_rhsm.aug	4.46 KB	-rw-r--r--
test_rmt.aug	826 B	-rw-r--r--
test_rsyncd.aug	1.27 KB	-rw-r--r--
test_rsyslog.aug	6.08 KB	-rw-r--r--
test_rtadvd.aug	859 B	-rw-r--r--
test_rx.aug	3.33 KB	-rw-r--r--
test_samba.aug	3.52 KB	-rw-r--r--
test_schroot.aug	2.25 KB	-rw-r--r--
test_securetty.aug	636 B	-rw-r--r--
test_semanage.aug	1.71 KB	-rw-r--r--
test_services.aug	2.87 KB	-rw-r--r--
test_shadow.aug	2.01 KB	-rw-r--r--
test_shells.aug	348 B	-rw-r--r--
test_shellvars.aug	19.05 KB	-rw-r--r--
test_shellvars_list.aug	4.18 KB	-rw-r--r--
test_simplelines.aug	724 B	-rw-r--r--
test_simplevars.aug	994 B	-rw-r--r--
test_sip_conf.aug	3.61 KB	-rw-r--r--
test_slapd.aug	3.03 KB	-rw-r--r--
test_smbusers.aug	664 B	-rw-r--r--
test_solaris_system.aug	2.48 KB	-rw-r--r--
test_soma.aug	424 B	-rw-r--r--
test_spacevars.aug	431 B	-rw-r--r--
test_splunk.aug	2.96 KB	-rw-r--r--
test_squid.aug	5.09 KB	-rw-r--r--
test_ssh.aug	3.12 KB	-rw-r--r--
test_sshd.aug	5.04 KB	-rw-r--r--
test_sssd.aug	896 B	-rw-r--r--
test_star.aug	1.56 KB	-rw-r--r--
test_strongswan.aug	2.57 KB	-rw-r--r--
test_stunnel.aug	791 B	-rw-r--r--
test_subversion.aug	3.06 KB	-rw-r--r--
test_sudoers.aug	9.9 KB	-rw-r--r--
test_sysconfig.aug	4.1 KB	-rw-r--r--
test_sysconfig_route.aug	522 B	-rw-r--r--
test_sysctl.aug	1.34 KB	-rw-r--r--
test_syslog.aug	11.05 KB	-rw-r--r--
test_systemd.aug	7.95 KB	-rw-r--r--
test_termcap.aug	16.69 KB	-rw-r--r--
test_thttpd.aug	1.17 KB	-rw-r--r--
test_tmpfiles.aug	9.94 KB	-rw-r--r--
test_toml.aug	7.92 KB	-rw-r--r--
test_trapperkeeper.aug	4.15 KB	-rw-r--r--
test_tuned.aug	259 B	-rw-r--r--
test_up2date.aug	6.23 KB	-rw-r--r--
test_updatedb.aug	855 B	-rw-r--r--
test_util.aug	428 B	-rw-r--r--
test_vfstab.aug	2.79 KB	-rw-r--r--
test_vmware_config.aug	1.7 KB	-rw-r--r--
test_vsftpd.aug	2.49 KB	-rw-r--r--
test_webmin.aug	195 B	-rw-r--r--
test_wine.aug	5.58 KB	-rw-r--r--
test_xendconfsxp.aug	7.74 KB	-rw-r--r--
test_xinetd.aug	2.78 KB	-rw-r--r--
test_xml.aug	20.04 KB	-rw-r--r--
test_xorg.aug	2.51 KB	-rw-r--r--
test_xymon.aug	4.29 KB	-rw-r--r--
test_xymon_alerting.aug	7.44 KB	-rw-r--r--
test_yaml.aug	1.34 KB	-rw-r--r--
test_yum.aug	7.28 KB	-rw-r--r--

Code Editor : test_keepalived.aug

(*
Module: Test_Keepalived
  Provides unit tests and examples for the <Keepalived> lens.
*)

module Test_Keepalived =

(* Variable: conf
   A full configuration file *)
   let conf = "! This is a comment
! Configuration File for keepalived

global_defs {
  ! this is who emails will go to on alerts
  notification_email {
    admins@example.com
    fakepager@example.com
    ! add a few more email addresses here if you would like
  }
  notification_email_from admins@example.com

smtp_server 127.0.0.1  ! I use the local machine to relay mail
  smtp_connect_timeout 30

! each load balancer should have a different ID
  ! this will be used in SMTP alerts, so you should make
  ! each router easily identifiable
  lvs_id LVS_EXAMPLE_01

vrrp_mcast_group4 224.0.0.18
  vrrp_mcast_group6 ff02::12
}

vrrp_sync_group VG1 {
  group {
    inside_network  # name of vrrp_instance (below)
    outside_network # One for each moveable IP.
  }
  notify /usr/bin/foo
  notify_master /usr/bin/foo
  smtp_alert
}

vrrp_instance VI_1 {
  state MASTER
  interface eth0

track_interface {
    eth0 # Back
    eth1 # DMZ
  }
  track_script {
    check_apache2    # weight = +2 si ok, 0 si nok
  }
  garp_master_delay 5
  garp_master_repeat 5
  garp_master_refresh 5
  garp_master_refresh_repeat 5
  priority 50
  advert_int 2
  authentication {
    auth_type PASS
    auth_pass mypass
  }
  virtual_ipaddress {
    10.234.66.146/32 dev eth0
  }

lvs_sync_daemon_interface eth0
  ha_suspend

notify_master   \"/svr/scripts/notify_master.sh\"
  notify_backup   \"/svr/scripts/notify_backup.sh\"
  notify_fault    \"/svr/scripts/notify_fault.sh\"
  notify          \"/svr/scripts/notify.sh\"

! each virtual router id must be unique per instance name!
  virtual_router_id 51

! MASTER and BACKUP state are determined by the priority
  ! even if you specify MASTER as the state, the state will
  ! be voted on by priority (so if your state is MASTER but your
  ! priority is lower than the router with BACKUP, you will lose
  ! the MASTER state)
  ! I make it a habit to set priorities at least 50 points apart
  ! note that a lower number is lesser priority - lower gets less vote
  priority 150

! how often should we vote, in seconds?
  advert_int 1

! send an alert when this instance changes state from MASTER to BACKUP
  smtp_alert

! this authentication is for syncing between failover servers
  ! keepalived supports PASS, which is simple password
  ! authentication
  ! or AH, which is the IPSec authentication header.
  ! I don't use AH
  ! yet as many people have reported problems with it
  authentication {
    auth_type PASS
    auth_pass example
  }

! these are the IP addresses that keepalived will setup on this
  ! machine. Later in the config we will specify which real
  ! servers  are behind these IPs
  ! without this block, keepalived will not setup and takedown the
  ! any IP addresses

virtual_ipaddress {
    192.168.1.11
    10.234.66.146/32 dev vlan933 # parse it well
    ! and more if you want them
  }

use_vmac
  vmac_xmit_base
  native_ipv6
  dont_track_primary
  preempt_delay

mcast_src_ip 192.168.1.1
  unicast_src_ip 192.168.1.1

unicast_peer {
    192.168.1.2
    192.168.1.3
  }
}

virtual_server 192.168.1.11 22 {
  delay_loop 6

! use round-robin as a load balancing algorithm
  lb_algo rr

! we are doing NAT
  lb_kind NAT
  nat_mask 255.255.255.0

protocol TCP

sorry_server 10.20.40.30 22

! there can be as many real_server blocks as you need

real_server 10.20.40.10 22 {

! if we used weighted round-robin or a similar lb algo,
    ! we include the weight of this server

weight 1

! here is a health checker for this server.
    ! we could use a custom script here (see the keepalived docs)
    ! but we will just make sure we can do a vanilla tcp connect()
    ! on port 22
    ! if it fails, we will pull this realserver out of the pool
    ! and send email about the removal
    TCP_CHECK {
      connect_timeout 3
      connect_port 22
    }
  }
}

virtual_server_group DNS_1 {
  192.168.0.1 22
  10.234.55.22-25 36
  10.45.58.59/32 27
}

vrrp_script chk_apache2 {       # Requires keepalived-1.1.13
  script \"killall -0 apache2\"   # faster
  interval 2                      # check every 2 seconds
  weight 2                        # add 2 points of prio if OK
  fall 5
  raise 5
}

! that's all
"

(* Test: Keepalived.lns
   Test the full <conf> *)
   test Keepalived.lns get conf =
     { "#comment" = "This is a comment" }
     { "#comment" = "Configuration File for keepalived" }
     {}
     { "global_defs"
       { "#comment" = "this is who emails will go to on alerts" }
       { "notification_email"
         { "email" = "admins@example.com" }
         { "email" = "fakepager@example.com" }
         { "#comment" = "add a few more email addresses here if you would like" } }
       { "notification_email_from" = "admins@example.com" }
       { }
       { "smtp_server" = "127.0.0.1"
         { "#comment" = "I use the local machine to relay mail" } }
       { "smtp_connect_timeout" = "30" }
       {}
       { "#comment" = "each load balancer should have a different ID" }
       { "#comment" = "this will be used in SMTP alerts, so you should make" }
       { "#comment" = "each router easily identifiable" }
       { "lvs_id" = "LVS_EXAMPLE_01" }
       {}
       { "vrrp_mcast_group4" = "224.0.0.18" }
       { "vrrp_mcast_group6" = "ff02::12" } }
     {}
     { "vrrp_sync_group" = "VG1"
       { "group"
         { "inside_network"
           { "#comment" = "name of vrrp_instance (below)" } }
         { "outside_network"
           { "#comment" = "One for each moveable IP." } } }
         { "notify" = "/usr/bin/foo" }
         { "notify_master" = "/usr/bin/foo" }
         { "smtp_alert" } }
     {}
     { "vrrp_instance" = "VI_1"
       { "state" = "MASTER" }
       { "interface" = "eth0" }
       { }
       { "track_interface"
         { "eth0" { "#comment" = "Back" } }
         { "eth1" { "#comment" = "DMZ" } } }
       { "track_script"
         { "check_apache2" { "#comment" = "weight = +2 si ok, 0 si nok" } } }
       { "garp_master_delay" = "5" }
       { "garp_master_repeat" = "5" }
       { "garp_master_refresh" = "5" }
       { "garp_master_refresh_repeat" = "5" }
       { "priority" = "50" }
       { "advert_int" = "2" }
       { "authentication"
         { "auth_type" = "PASS" }
         { "auth_pass" = "mypass" } }
       { "virtual_ipaddress"
         { "ipaddr" = "10.234.66.146"
           { "prefixlen" = "32" }
           { "dev" = "eth0" } } }
       { }
       { "lvs_sync_daemon_interface" = "eth0" }
       { "ha_suspend" }
       { }
       { "notify_master" = "\"/svr/scripts/notify_master.sh\"" }
       { "notify_backup" = "\"/svr/scripts/notify_backup.sh\"" }
       { "notify_fault" = "\"/svr/scripts/notify_fault.sh\"" }
       { "notify" = "\"/svr/scripts/notify.sh\"" }
       { }
       { "#comment" = "each virtual router id must be unique per instance name!" }
       { "virtual_router_id" = "51" }
       { }
       { "#comment" = "MASTER and BACKUP state are determined by the priority" }
       { "#comment" = "even if you specify MASTER as the state, the state will" }
       { "#comment" = "be voted on by priority (so if your state is MASTER but your" }
       { "#comment" = "priority is lower than the router with BACKUP, you will lose" }
       { "#comment" = "the MASTER state)" }
       { "#comment" = "I make it a habit to set priorities at least 50 points apart" }
       { "#comment" = "note that a lower number is lesser priority - lower gets less vote" }
       { "priority" = "150" }
       { }
       { "#comment" = "how often should we vote, in seconds?" }
       { "advert_int" = "1" }
       { }
       { "#comment" = "send an alert when this instance changes state from MASTER to BACKUP" }
       { "smtp_alert" }
       { }
       { "#comment" = "this authentication is for syncing between failover servers" }
       { "#comment" = "keepalived supports PASS, which is simple password" }
       { "#comment" = "authentication" }
       { "#comment" = "or AH, which is the IPSec authentication header." }
       { "#comment" = "I don't use AH" }
       { "#comment" = "yet as many people have reported problems with it" }
       { "authentication"
         { "auth_type" = "PASS" }
         { "auth_pass" = "example" } }
       { }
       { "#comment" = "these are the IP addresses that keepalived will setup on this" }
       { "#comment" = "machine. Later in the config we will specify which real" }
       { "#comment" = "servers  are behind these IPs" }
       { "#comment" = "without this block, keepalived will not setup and takedown the" }
       { "#comment" = "any IP addresses" }
       { }
       { "virtual_ipaddress"
         { "ipaddr" = "192.168.1.11" }
         { "ipaddr" = "10.234.66.146"
           { "prefixlen" = "32" }
           { "dev" = "vlan933" }
           { "#comment" = "parse it well" } }
         { "#comment" = "and more if you want them" } }
       { }
       { "use_vmac" }
       { "vmac_xmit_base" }
       { "native_ipv6" }
       { "dont_track_primary" }
       { "preempt_delay" }
       { }
       { "mcast_src_ip" = "192.168.1.1" }
       { "unicast_src_ip" = "192.168.1.1" }
       { }
       { "unicast_peer"
         { "ipaddr" = "192.168.1.2" }
         { "ipaddr" = "192.168.1.3" } } }
     { }
     { "virtual_server"
       { "ip" = "192.168.1.11" }
       { "port" = "22" }
       { "delay_loop" = "6" }
       { }
       { "#comment" = "use round-robin as a load balancing algorithm" }
       { "lb_algo" = "rr" }
       { }
       { "#comment" = "we are doing NAT" }
       { "lb_kind" = "NAT" }
       { "nat_mask" = "255.255.255.0" }
       { }
       { "protocol" = "TCP" }
       { }
       { "sorry_server"
         { "ip" = "10.20.40.30" }
         { "port" = "22" } }
       { }
       { "#comment" = "there can be as many real_server blocks as you need" }
       { }
       { "real_server"
         { "ip" = "10.20.40.10" }
         { "port" = "22" }
         { "#comment" = "if we used weighted round-robin or a similar lb algo," }
         { "#comment" = "we include the weight of this server" }
         { }
         { "weight" = "1" }
         { }
         { "#comment" = "here is a health checker for this server." }
         { "#comment" = "we could use a custom script here (see the keepalived docs)" }
         { "#comment" = "but we will just make sure we can do a vanilla tcp connect()" }
         { "#comment" = "on port 22" }
         { "#comment" = "if it fails, we will pull this realserver out of the pool" }
         { "#comment" = "and send email about the removal" }
         { "TCP_CHECK"
           { "connect_timeout" = "3" }
           { "connect_port" = "22" } } } }
       { }
       { "virtual_server_group" = "DNS_1"
         { "vip"
           { "ipaddr" = "192.168.0.1" }
           { "port" = "22" } }
         { "vip"
           { "ipaddr" = "10.234.55.22-25" }
           { "port" = "36" } }
         { "vip"
           { "ipaddr" = "10.45.58.59"
           { "prefixlen" = "32" } }
           { "port" = "27" } } }
       { }
       { "vrrp_script" = "chk_apache2"
         { "#comment" = "Requires keepalived-1.1.13" }
         { "script" = "\"killall -0 apache2\""
           { "#comment" = "faster" } }
         { "interval" = "2"
           { "#comment" = "check every 2 seconds" } }
         { "weight" = "2"
           { "#comment" = "add 2 points of prio if OK" } }
         { "fall" = "5" }
         { "raise" = "5" } }
       { }
       { "#comment" = "that's all" }

(* Variable: tcp_check
   An example of a TCP health checker *)
let tcp_check = "virtual_server 192.168.1.11 22 {
  real_server 10.20.40.10 22 {
    TCP_CHECK {
      connect_timeout 3
      connect_port 22
      bindto 192.168.1.1
    }
  }
}
"
test Keepalived.lns get tcp_check =
  { "virtual_server"
    { "ip" = "192.168.1.11" }
    { "port" = "22" }
    { "real_server"
      { "ip" = "10.20.40.10" }
      { "port" = "22" }
      { "TCP_CHECK"
        { "connect_timeout" = "3" }
        { "connect_port" = "22" }
        { "bindto" = "192.168.1.1" } } } }

(* Variable: misc_check
   An example of a MISC health checker *)
let misc_check = "virtual_server 192.168.1.11 22 {
  real_server 10.20.40.10 22 {
    MISC_CHECK {
      misc_path /usr/local/bin/server_test
      misc_timeout 3
      misc_dynamic
    }
  }
}
"
test Keepalived.lns get misc_check =
  { "virtual_server"
    { "ip" = "192.168.1.11" }
    { "port" = "22" }
    { "real_server"
      { "ip" = "10.20.40.10" }
      { "port" = "22" }
      { "MISC_CHECK"
        { "misc_path" = "/usr/local/bin/server_test" }
        { "misc_timeout" = "3" }
        { "misc_dynamic" } } } }

(* Variable: smtp_check
   An example of an SMTP health checker *)
let smtp_check = "virtual_server 192.168.1.11 22 {
  real_server 10.20.40.10 22 {
    SMTP_CHECK {
      host {
        connect_ip 10.20.40.11
        connect_port 587
        bindto 192.168.1.1
      }
      connect_timeout 3
      retry 5
      delay_before_retry 10
      helo_name \"Testing Augeas\"
    }
  }
}
"
test Keepalived.lns get smtp_check =
  { "virtual_server"
    { "ip" = "192.168.1.11" }
    { "port" = "22" }
    { "real_server"
      { "ip" = "10.20.40.10" }
      { "port" = "22" }
      { "SMTP_CHECK"
        { "host"
          { "connect_ip" = "10.20.40.11" }
          { "connect_port" = "587" }
          { "bindto" = "192.168.1.1" } }
        { "connect_timeout" = "3" }
        { "retry" = "5" }
        { "delay_before_retry" = "10" }
        { "helo_name" = "\"Testing Augeas\"" } } } }

(* Variable: http_check
   An example of an HTTP health checker *)
let http_check = "virtual_server 192.168.1.11 22 {
  real_server 10.20.40.10 22 {
    HTTP_GET {
      url {
        path /mrtg2/
        digest 9b3a0c85a887a256d6939da88aabd8cd
        status_code 200
      }
      connect_timeout 3
      connect_port 8080
      nb_get_retry 5
      delay_before_retry 10
    }
    SSL_GET {
      connect_port 8443
    }
  }
}
"
test Keepalived.lns get http_check =
  { "virtual_server"
    { "ip" = "192.168.1.11" }
    { "port" = "22" }
    { "real_server"
      { "ip" = "10.20.40.10" }
      { "port" = "22" }
      { "HTTP_GET"
        { "url"
          { "path" = "/mrtg2/" }
          { "digest" = "9b3a0c85a887a256d6939da88aabd8cd" }
          { "status_code" = "200" } }
        { "connect_timeout" = "3" }
        { "connect_port" = "8080" }
        { "nb_get_retry" = "5" }
        { "delay_before_retry" = "10" } }
      { "SSL_GET"
        { "connect_port" = "8443" } } } }

${this.title}

Code Editor : test_keepalived.aug